Electromyography KEMG-A100 is a 4-channel digital neurophysiological EMG/EP recording unit. System utilizes stimulator-coupled amplifier for compact system assembly. Functional electric stimulator generates single and dual current stimulation for optimal diagnostic evaluation of the condition.
| Number of channels | 4 channel |
| Stimulus Modes | Single-current, Dual-current Stimulator |
| Stimulus Frequency | 0.1 Hz ~ 50 Hz |
| Sample Rate | 200 KHz |
| Analysis Time | 1 ms ~ 1000 ms |
| CMRR | >110 dB |
| Amplitude Frequency | 1 Hz ~ 5 Hz |
| Impedance | > 1000 MΩ |
| 0.1 H7:I23⁓ 100 Hz, Error <± 10% | 1 ~ 5000 times |
| Test Protocols : EMG | Motor Unit Potential (MUP) Interference phase (IP) Scanning EMG (QEMG) |
| Test Protocols : EP | SEP : USEP / LESEP / TSEP / SCEP AEP : BAEP / MAEP / LAEP / Eooch G, 40Hz VEP : PRVEP / FVEP / ERG / EOG |
| Test Protocols : NCV | MCV / SCV / SSCT / RNS / F-wave / H-reflex / Blink reflex / SSR |
| Max Higher Filters Frequency | 50 Hz |
| Min Lower Filters Frequency | 0.1 Hz |
| A/D Conversion Rate | 24 bit |
| Stimulus Width | 0.1 ⁓ 100 Hz, Error <± 10% |
| Pulse Mode | 50 µs ~ 1000 µs |
| Pulse Duration Error | Single, Double and Triple pulses |
| Gain Amplifier | 0.05, 0.1, 0.5, 1 ms , Error <± 10% |
| Dimensions | 50 times ⁓ 50 million times |
| Weight | 510 x 445 x 205 mm |
Used in OPD, neurology departments to detect musculature or sensory abnormalities, muscle activation level or to analyze any gait or biomechanics application.
| Sr | Standard Accessories | Qty |
|---|---|---|
| 1 | Saddle Electrode ( Bar type) | 1 pc |
| 2 | Saddle Electrode ( Felt type) | 1 pc |
| 3 | Ring Electrode | 1 pc |
| 4 | Band Electrode(long) | 1 pc |
| 5 | Band Electrode(short) | 1 pc |
| 6 | Adhensive electrode(disposable) | 40 pcs |
| 7 | Concentric needle electrodeã€small】 | 1 pc |
| 8 | Concentric needle electrodeã€medium】 | 4 pcs |
| 9 | Concentric needle electrodeã€large】 | 1 pc |
